|
型號(hào)
|
CA 1510
|
|
Measuring principle
|
Non-diffusive infrared (NDIR) technology
|
|
Type of sensor
|
Double-beam infrared cell sensor
|
|
Measurement range
|
0 to 5,000 ppm
|
|
Uncertainty
|
± 50 ppm ± 3 % of value measured
|
|
Response time, 63 %
|
< 200 seconds
|
|
Resolution
|
1 ppm
|
Type of sensor
|
CMOS
|
|
measurement range
|
-10 °C to +60 °C
|
Accuracy
|
± 0.5 °C
|
Resolution
|
0.1 °C
|
Type of sensor
|
Capacitive
|
Measurement range
|
5 to 95 % RH
|
Accuracy
|
± 2 % RH
|
Resolution
|
0.1 % RH
|
|
Point measurement
Monitoring
|
Quick measurement and display of the CO2, temperature and relative humidity values
|
Monitoring
|
1D mode：indication of CO2 confinement
Visual (two-colour backlighting & pictograms) and/or audible indication of high
confinement when the CO2 concentration is between 1,000 ppm and a 1,700 ppm
threshold.
3D mode：indication of optimum comfort zone on the basis of the hygrothermal criteria
and the CO2 concentration.
|
Energy-saving (ECO)：for fixed use on battery power, the product performs
measurements every 10 minutes over a programmable time range for a battery life of
up to one year.
|
Logger
|
Triggering of programmed recording (P_REC)
The start date, recording rate and end date can be customized with the PC software
or the Android application. Possibility of locking the display in this mode (no values
displayed).
Manual triggering (M_REC)
Manual start and stop controls on the product.
Recording is performed at the rate of the mode currently selected.
|
Recording interval
|
Customizable from 1 minute to 2 hours
|
Storage
|
More than 1 million measurements
|
Buzzer
|
Yes
|
Units
|
°C or °F
|
|
Backlighting
Display Hold function
Min-Max
|
Yes
|
Automatic power-off
|
Yes (in portable mode only)
|
Product operating range
|
Temperature: -10 °C to +60 ° C – Humidity: 5 to 95 %RH
|
Dimensions / weight
|
125 x 65.5 x 32 mm / 190 g with batteries
|
Protection
|
IP40
|
Compliance
|
IEC 61010-1 for 50 V in Category II – IEC 61326-1 – Compliance with French decree no. 2012-14
|
Power supply
|
- Alkaline batteries: 2 x 1.5 V AA / LR6 or rechargeable battery
- Connection to mains possible with mains / micro USB adapter supplied as standard
|
Interfaces
|
2 communication modes possible:
- Bluetooth wireless communication
- USB link; the product is then recognized as a USB key for easy file transfer
|
Mounting
|
C.A 1510 casing equipped with a magnet, a wall-suspension system and a slot for hanging the product. A wall support for use with a padlock
(padlock not supplied) is available as an accessory, as is a desktop stand (supplied as standard with the C.A 1510W).
|
|
Functions of the AQR (Air Quality Report)
software supplied as standard
|
Graphic representation or as table of values – Data export – Real-time mode
Calculation of the confinement index with selection of presence periods – Report generation
|